Did you know mold on drywall can lead to serious respiratory disorders? It is important to remove mold as soon as you notice it has started to grow.
Methods for killing mold differ depending on if the walls are painted or not. In case the drywall is coated, it can be easy to clean by merely using water and an appropriate cleaning agent. However, the task is a lot more difficult when the wall is not painted.
There may even some occasions even where you need to simply remove the drywall and start again. But before we get you into a panic, let’s take a look at how to remove the mold using good old elbow grease.
Our recommended way of removing mold on drywall is to use a mold fogger, however if you want to try other methods first then keep reading.
Disclosure: As an Amazon Associate I earn from qualifying purchases. However, this does not impact our reviews and comparisons. All opinions are our own we pride ourselves on keeping our articles fair and balanced. For more info see our disclosure statement.
How to Remove Mold From Painted Drywall
Step 1: Select a mold killing cleaning agent
The market has a number of options when it comes to cleaning agents.
Ranging from mild to potent, the options are available in both chemical and natural alternatives. Depending on the severity of black mold problems, you may go for a stronger chemical if needed. The main options are:
- Baking Soda: Create a cleaning solution with one part of baking soda added to five parts of water. It will be the mildest yet safest cleanser to use.
- Vinegar: Mixing vinegar with equal parts of water can be a slightly stronger cleaning solution. It is completely natural and safe when you have pets or children around.
- Detergents: Use detergents as per the directions on the bottle. These are completely safe to use with children or pets around.
- Bleach: Not everyone recommends using bleach as its fumes can be harmful to breathe in. However, it can be a strong effective cleaner that is safe for removing mold on drywall. Mixing one part of bleach with three parts of water can offer you a strong solution.
- Concrobium Mold Control: This is by far our most preferred way to clean mold. It not only kills the mold, but creates a protective barrier so no mold can grow back. Can be bought in a handy spray bottle and no mixing is required.
- Use to eliminate mold, mildew, musty odors and prevent regrowth
- EPA-registered formula crushes mold spores as it dries and leaves an invisible, barrier
- Odorless solution cleans between 80-110 sq. ft. per 32 oz. bottle
- Unique mold spray contains no bleach or harsh chemicals, safe for use on a wide range of surfaces
- Simply spray onto effected area and allow to dry - no scrubbing or rising required
Step 2: Pour the cleaning solution into a spray bottle
Take your mixed cleaning solution and pour it into a spray bottle. Ensure that the solution is mixed thoroughly by shaking the bottle.
Step 3: Properly ventilate room
In the case that you are using a stronger chemical (bleach or mold control) you will want to make the room is well ventilated. Bleach especially contains harmful elements and should not be inhaled. So before you begin the cleaning process, make sure all the doors and windows are open.
Step 4: Protect surrounding areas
Accidental spills of the chemicals or cleaners in use is possible and might end up damaging items. Hence, move furniture and other belongings outside the room you are cleaning. Make sure you cover the floor using a plastic drop cloth.
Step 5: Spray the cleaning solution on the mold
Now you are ready to attack the mold, take out the spray and spray a little bit on the mold.
Make sure you shake it well before using. You do not want to drench the area as additional moisture could result in an increase to the mold problem or damage to your walls.
The best thing to do here would be spraying the solution on the mold twice and covering it entirely with the solution, but making sure the solution is not running down the wall.
Step 6: Use a Brush
Use a soft bristle cleaning brush or an old toothbrush to scrub the area. If you do not have either of these, you may use the abrasive side of a dish sponge, just be careful not to damage your wall. You should scrub till you no longer see any visible mold around the area.
Step 7: Dry the Area
Areas left wet or damp are a breeding ground for mold, so dry the areas thoroughly by pointing an electric fan at the wall.
Step 8: Stain-blocking paint
Sometimes when you clean away mold on drywall it will leave a stain that is impossible to remove by scrubbing. To cover this up you will need to use a stain blocking primer and paint color of your choice to hide the stain.
- KILZ MAX is a water-base primer, sealer, stain and odor blocker developed with new technology thatâ€™s formulated to perform like oil-and shellac-based products.
- KILZ MAX tackles tough stains from water damage, rust, smoke, nicotine, grease, tannin, ink, pencil, felt marker, pet stains and more while also sealing pet and smoke odors.
How to Remove Mold on Drywall – Unpainted
Removing black mold from unpainted drywall is much tougher due to the fact that the mold can penetrate much deeper due to their being no protective barrier, but all is not lost and it definitely possible if you follow the steps discussed below:
Step 1: Protect surrounding areas
The first and foremost thing to do is to cover the flooring and other surrounding areas by using a jab saw for cutting the area by sawing piercing through the wall and sawing around the lines marked using the pencil.
It is important that before using the jab saw, you make sure there are no electrical wires, water pipes or other items that you may damage in the wall.
If you are unsure, make a very small hold with a screw driver first and slowly knock enough out of the drywall till you can make sure it is safe. After the marked area of the drywall becomes free, carefully remove the moldy piece and set it down on the plastic below.
Step 4: Clean the room with a HEPA vacuum
Use a High-Efficiency Particulate Air (HEPA) vacuum to clean the entire room.
This needs to be done as mold spores may have been disturbed and moved about during the cleaning process. If you can’t get a hold of a HEPA vacuum then a regular one will do.
Step 5: Carefully evaluate Doors & Windows
In the case that the mold was near any doors or windows, ask someone to spray water on the door or window from the outside using a hose.
Check if any moisture makes its way into the room. If you do notice that moisture is evident, then seal the leak from both the sides to prevent the leak from appearing again.
Step 6: Fit the new drywall
Cut a new piece of drywall to fit the hole you cut to remove the moldy area. Ensure it is as tight a fit as possible.
Step 7: Secure the drywall
Using drywall screws attach the drywall to the wooden beams on the wall behind it.
Step 8: Apply Joint Compound
The purpose of joint compound (also known as drywall compound) is to cover up the gaps between the new and old drywall and create a seamless finish. Apply the joint compound over the perimeter of the new section of drywall. For a detailed guide on this, see this guide.
Step 9: Let the joint compound dry
Let the drywall compound dry for at least 24 hours. Follow this by using sandpaper to smooth the compound so it is flush with the wall after the compound has completely dried.
Step 11: Use a HEPA Vacuum cleaner
Lastly, clean the area with a High-Efficiency Particulate Air (HEPA) vacuumto remove any mold spores that might have landed in the surrounding areas. The idea here is to clean everything thoroughly and remove any chance of the mold reappearing.
Using a Mold Fogger
There are some occasions when there is just too much mold to remove by hand. When this happens you can either rip all the drywall out and start again or you can try using a mold fogger.
Foggers produce a fine mist of Concrobium mold control that evenly covers all surfaces in the room. It not only kills mold, but also creates a protective barrier to prevent mold from re-growing.
Pricing last updated on 2020-09-20 at 06:53 / affiliate links - Details