Our Rating:
Key Features:
ABS Plastic lightweight blades
Wifi connectivity and smart device app
DC motor for efficient operation
6 Speeds
A reasonable fan let down by poor design
When it comes to upgrading the ceiling fans in your house there is plenty of choices. And this makes that decision quite hard. Especially when you are upgrading multiple fans at a time like I was.
Which fan should you buy, and which brand? What features should you opt-in for?
Recently I had to make this choice, and I opted for the Arlec Grid Connect fans which were purchased from Bunnings.
We purchased a total of 5 of these fans and had them installed by a qualified electrician.
And installation is where the problems started – firstly the wireless/wifi receiver barely fits in the fan housing. It really made installing these fans a pain, the electrician had a lot of trouble getting the fan to mount and we were careful to follow the installation instructions exactly.
But that wasn’t the biggest problem, the main problem was that when the fans are on speed 2 – they cause the fan to vibrate, which in turn causes the light cover to vibrate VERY loudly. And this happened to ALL the fans.
To Arlec’s credit, they quickly responded to our support request and got new fans out to us ASAP. But the new fans had the same problem, which leads me to believe that it is a design problem.
Putting these problems aside, the fan works as a fan should, the Wifi connectivity works well and the smart device app is great. In the review below, I will go into these in a little more depth, so keep reading if this interests you.
Note: This review took place in Australia. As far as we know this product is only available in Australia.
Review Criteria Ratings
| Ease of Installation | 2/5 |
| Build Quality | 4/5 |
| Usability | 2/5 |
Pros
- Good air movement
- Arlec support is quick to respond and help
- Smart device app works well
Cons
- Hard to install due to remote receiver size
- Motor speed causes the fan to vibrate and cause noise at certain speeds
Should You Buy It?
Unfortunately with the continued problems we had with the fan causing a high level of vibration and noise from the light cover on speed 2 – we can’t recommend you buy these fans.
Arlec Smart Ceiling Fan Overview
Arlec is an Australian company that was founded way back in 1947, and since then they have grown to become Australia’s largest privately owned wholesaler of electronic and electrical products.
So it is easy to see how their products have found their way into Australia’s biggest hardware store – Bunnings.
Their fan range has grown over the last few years, and they now offer a full WiFi range called “Grid Connect”. These devices connect directly to your WiFi network and can be controlled from a smart device running the Grid Connect app.
How The Arlec Smart Ceiling Fan Performs
As a whole, the Arlect smart fan isn’t a bad product, unfortunately, it’s just let down by a seemingly small, but loud problem that seems to come from a design flaw.
Installation
Looking at the instructions, the installation seems simple enough – and even the electrician we used agreed. However upon getting to the point where you need to mount the remote control receiver into the mounting bracket, then slide the top canopy over it.
There is simply too much cabling and the top canopy is too small to do this easily, and it is VERY tight. I believe that this is what the problems with the noise all come back to.
Apart from that, the fan goes together well – the parts are sturdy and feel like a quality-built product.
Fan Functionality
As the intro mentioned, this fan works well until you set the speed to speed 2. Which for me, just so happens to be the ideal speed most of the time.
When you set the fan to speed 2, the motor seems to oscillate just the right amount to cause a vibration down the fan body and the light cover makes a loud buzzing sound.
This problem can be solved by taking the light cover off, but this is not a permanent fix and in some installations would be impossible to take on and off all the time.
And this problem was just a single occurrence, it happened across all the fans we purchased. I would also like to qualify that the installation was carried out correctly, onto a sturdy roof beam by a qualified contractor.
Grid Connect – Wifi Connectivity
This is where the Arlec smart product really shines. The Wifi is easy to connect to your home system, and the app works well.
It’s very easy to set the speed of your fan, turn the light on and off and adjust a myriad of other settings.
The fan also comes with a remote control and a wall mount bracket. If I have one complaint about this, it’s the fact that it is not easy to find the light switch on the remote in the dark.
Conclusion
While I have always had good experiences with Arlec products in the past, this one has left a sour taste in my mouth. I’m going to get the contractor back to have another look and maybe try putting the receiver in the ceiling to see if the reduced pressure on the mount helps with the vibration issues.
I will update this review accordingly.
Can’t get the remote control to work have changed batteries, when you press any button the little light comes on but not working otherwise, so fan and light is not able to be used at all in our lounge room 🤷♀️
You might need to retune the fun to the remote – your manual should tell you how to do that.
Brought 4 with the intention to buy more, had no issues with installation and so far working as expected . Grid connect is great too, makes things very easy, only downside with Arlec fans in general is we need one that’s bigger than the 130 one and can’t find any this far.
Thats good news for you! Did you find the casing over the receiver hard to fit?
I bought 5 from Bunnings in February, all work fine but are as noisy as hell. When contacted support all I got was “send a video”. Would have expected a bit more than that. Not real happy.
Sounds like the same as my problem. Did they replace them? Send them to my article and see what they say.
you don’t need the remote of your using your smart assistant …
love the product